Control with computer and 3 servo motors. Superior quality seals even when using thick film materials.

>> General Structural Diagram (PDF documents)

* This file is stored in PDF format which requires Adobe Acrobat Reader for viewing.
If you do not have Acrobat Reader installed on your computer, click this banner to install.

	Characteristic

Due to the use of computer controlled servo motors for film feeding and sealing mechanisms it is possible to produce pouches with optimal conditions for each product. Sealing time remains constant independent of running speed.

* Multi-function for easy operation *

1. Voluntary setting and fixing of sealing time
2. User-friendly touch screen
3. Auto tuning sensor for cutting length control
4. Lift-up function of sealing units during machine stoppage
5. Table conveyor with height adjustment
6. Alarms and auto stop function when web finishes. Yard meter(total feeding length)

	Characteristic

Production speed	Zipper pouch: 30-120 cycles/min. 3-side seal pouch: 30-160 cycles/min. Standing pouch: 30-140 cycles/min. * The production speed may be affected by the type of material and the cutting length.
Film Size Range	Main film: W = 400mm-1250mm Diameter:800mm Bottom tape for standing pouch: W = 60mm-180mm Diameter:500mm
Pouch Size Range	3-side seal pouch: W=75mm-600mm L=50mm-500mm 3-side seal pouch with Zipper (1-lane production) W=80mm-250mm L=200mm-550mm 3-side seal pouch with Zipper (2-lane production) W=80mm-250mm L=100mm-275mm Standing pouch (with and without zipper) (1-lane production) W=80mm-200mm L=200mm-550mm Standing pouch (with and without zipper) (2-lane production) W=80mm-200mm L=100mm-275mm
Machine weight	10000kg (Approx.)
Main Web Stand	Horizontal Single Web Stand
Main Web Shaft	3-inch Air Shaft
Main Web Brake	Automatic Control by value input
L.P.C.	Mitsuhashi Line Position Controller
Bottom tape stand	Vertical type
Bottom tape brake	Automatic control (Operating side / Non-operating side 1 pc.each)
Zipper Reel Stand	2 units
Bottom tape punching unit	Single-punch holder 2 sets, Holder mount 1 set, Punch diameter 15mm, Evacuation unit 1set
Zipper Sealing and Cooling Unit	Heater (L:520mm), Cooling Bar (L: 250mm)
Longitudinal Sealing Unit	Heater (L:620mm L:520mm for standing pouch) : 4pcs.(W:80/50/50/80mm), Rubber Base
Longitudinal Cooling Unit	Cooling Bar (L:520mm) : 4pcs.(W:70/30/30/70mm), Rubber Base
Razor Unit at the middle feed roller	Razor Holder : 1pc., Trimming Guide
Bottom Sealing Unit	5 units (Point Sealing Unit: 3 units)
Bottom Cooling Unit	2 units
Razor Unit at the front feed roller	Razor Holder : 4pcs., Trimming Guide
Monitor	Touch Screen
Table Conveyor	Up and down movement (Separate type)
Thermostat	22 pcs., Upper and lower limit warning
Alarms	Start Discharge, Web Run Out, Web End, Web Splice, Bottom tape splice, Zipper Splice
Accessories	Guillotine knives : 1set, Seal Bar (Longitudinal / Bottom) : 20pcs., Tools : 1set
Thermocouple	Attaching type
Option	Second Stage Unwinder Floor Pick Up 2-roll Feeding System NIRECO Tension Controller Accumulator Automatic Bottom Tape Splicer Extension Of Bottom Tape Unwinder Bottom Tape Punch Refuse Detector Automatic Bottom Tape Punch Positioning Unit Ultrasonic Sealing Device For Zipper Point Sealing Water Cooling Type Zipper Guide Plate Skip Drive Powder Sprayer Punching Unit In-line Corner Punching Unit Evacuation Unit Twin Cutter Cutter Controller
Power	AC200V 3P Motor load 18kW AC200V Heater load 41kW
Cooling water	10-15 liters/min.
* Operating system is Windows XP. * The above values and the configuration may be changed for improvement without previous notice. * Machine specifications are slightly defferent from Japanese ones. Please ask our sales staffs for details.

Page Top