Precise web feed with 3 computer controlled servo motors Superior quality seals even when using thick film materials.

>> General Structural Diagram (PDF documents)

* This file is stored in PDF format which requires Adobe Acrobat Reader for viewing.
If you do not have Acrobat Reader installed on your computer, click this banner to install.

	Characteristic

This is a machine for making standing pouch and 3-side sealed pouch. This machine employs 2 AC servo motors for film feeding and one independently operating AC servo motor for the up and down movement of the sealing units. The sealing time is set separately and remains constant independent of the running speed. Format changes are very fast and wastage is reduced to a minimum due to the easy, user-friendly loading of parameters by personal computer. The individual set-ups are stored in the computer for future reference and can also be output on the lineprinter if desired.

	Specifications

Production Speed	3-side seal pouch: 30-180 cycles/min. Standing pouch: 30-140 cycles/min. * The production speed may be affected by the type of material and the cutting length.
Film Size Range	Main film: W = 400mm-1250mm Diameter: 800mm Bottom tape for standing pouch: W = 60mm-180mm Diameter: 500mm
Pouch Size Range	3-side seal pouch: W=75mm-600mm L=50mm-500mm Standing pouch (1-lane production): W=80mm-200mm L=200mm-550mm Standing pouch (2-lane production) : W=80mm-200mm L=100mm-275mm
Machine Weight	8500kg (Approx.)
Main Web Stand	Horizontal Single Web Stand
Main Web Shaft	3-inch Air Shaft
Main Web Brake	Automatic Control by value input
L.P.C.	Mitsuhashi Line Position Controller
Bottom tape stand	Vertical type
Bottom tape brake	Automatic control (Operating side / Non-operating side 1 pc.each)
Bottom tape punching unit	Single-punch holder 2 sets, Punch diameter 15mm, punch rail 1 set, Evacuation unit 1set
Longitudinal Sealing Unit	Heater (L:620mm L:520mm for standing pouch) : 4pcs.(W:80/50/50/80mm), Rubber Base
Longitudinal Cooling Unit	Cooling Bar (L:520mm) : 4pcs.(W:70/30/30/70mm), Rubber Base
Razor Unit at the middle feed roller	Razor Holder : 1pc., Trimming Guide
Side Sealing Unit	3units (Point Sealing Unit/ 1 unit)
Side Cooling Unit	2units
Razor Unit at the front feed roller	Razor Holder : 4pcs., Trimming Guide
Monitor	Touch Screen
Table Conveyor	Up and down movement (Separate type)
Thermostat	14 pcs., Upper and lower limit warning
Alarms	Start Discharge, Web Run Out, Web End, Web Splice, Bottom tape splice, Hole Error
Accessories	Guillotine knives : 1set, Seal Bar (Longitudinal / Bottom) : 20pcs., Tools : 1set
Thermocouple	Attaching type
Option	Second Stage Unwinder Floor Pick Up NIRECO Tension Controller Accumulator Automatic Bottom Tape Splicer Extension Of Bottom Tape Unwinder Bottom Tape Punch Refuse Detector Automatic Bottom Tape Punch Positioning Unit Skip Drive Powder Sprayer Punching Unit Evacuation Unit Twin Cutter Cutter Controller
Power	AC200V 3P Motor load 18kW AC200V Heater load 28kW
Cooling water	10-15 liters/min.
* Operating system is Windows XP. * The above values and the configuration may be changed for improvement without previous notice. * Machine specifications are slightly defferent from Japanese ones. Please ask our sales staffs for details.

Page Top